# 1 "/pisa/exp/stan/nmr/lists/pp/c13hsqcse.cui"
;c13hsqcse.fa
;clipper p180=H1_180,C13_180
;f1: 1H, f2: 15N, f3: 13C (channel assignments may be changed below)
;d1: relaxation delay=d1+0.1s
;p1 90 H at pl1
;p3 90 C at pl3
;p11 90 H1 2ms selective water pulse at power pl11. 
; Check for phase difference between hard H1 and soft H1 
; pulses and set phcor21 accordingly.
;d2: 1/(4Jch), aliph: 1.87ms, arom: 1.5ms
;d4: 1/(4Jch) for CH, 1/(8Jch) for CH, CH2 and CH3
;  i.e. 1.87ms or 0.93ms, resp.
;  for arom: 1.5ms
;pl0 120dB
;N15 Waltz-16 PCPD at pl12, cpdprg2 (optional)
;C13 GARP decoupling using CPDPRG3 and PCPD at pl13
;C'  Compensated SEDUCE1 decoupling of C', using p31 at sp3, 
;    shape seduce1c5/6, offset 0, cpdprg4 waltz16sp3p31 (optional).
;C evolution:
;  in0, SW(C)=1/(2*in0), typically 60 ppm
;  l4 complex points
;  Define C_90180 below for DW/2 initial delay in t1 (0/90,-180 phase).
;  Processing: Echo-Antiecho.
;ns=2, 4,..., ds=2, 4,...
;Recommendations for gradients:
;gpz1:  20%
;gpz2:  25%
;gpz3:  55%
;gpz4:  25%
;gpz5:  15%
;gpz6:  55%
;gpz7: -22%
;gpz8:   2%
;gpnam1: sine.50
;gpnam2: sine.50
;gpnam3: sine.100
;gpnam4: sine.32
;gpnam5: sine.32
;gpnam6: sine.10
;gpnam7: sine.100
;#define ONE_D		; uncomment for 1D experiment
;#define FLIP_BACK	; uncomment for (hopefully) selective H2O flip-back
;#define N15_DEC	; uncomment for N15 decoupling
;#define SEDUCE		; uncomment for compensated SEDUCE-1 decouling of C'
;#define C_90180		; uncomment for DW/2 initial delay in t1 (90,-180) 
;#define MESSERLE	; this may improve solvent suppression (don't use with flip-back)
;#define OPTIM_P19	; uncomment if you want to optimize p19 (GRAD6)

;			; the correct expt time (works with XWIN-NMR 2.x)
;Define channel assignments:




;You shouldn't have to worry about anything beyond this point :-)
# 58 "/pisa/exp/stan/nmr/lists/pp/c13hsqcse.cui"

# 61 "/pisa/exp/stan/nmr/lists/pp/c13hsqcse.cui"

define delay TAUA2
define delay TAUA4
define delay TAUA5
define delay TAUB
define delay DELTA
define delay CEN_HC1
define pulse H1_90
define pulse H1_180
define pulse H1_S90
define pulse C13_90
define pulse C13_180
define pulse GRAD1
define pulse GRAD2
define pulse GRAD3
define pulse GRAD4
define pulse GRAD5
define pulse GRAD6
define pulse GRAD7
"d11=100m"                      ;disk i/o
"d12=10u"                       ;power switching etc.
"d13=5u"                        ;a short delay
"d14=60u"			;ip,id etc.
"d16=300u"			;gradient recovery
"H1_90=p1"
"H1_180=H1_90*2"
# 89 "/pisa/exp/stan/nmr/lists/pp/c13hsqcse.cui"

"C13_90=p3"
"C13_180=C13_90*2"
"CEN_HC1=C13_90-H1_90"
"d6=H1_90"
"d7=C13_90"

"GRAD1=400u"
"GRAD2=400u"
"GRAD3=720u"
"GRAD4=250u"
"GRAD5=250u"

"p19=91.5u"			; configurable: set to the optimum value on your instrument

"GRAD6=p19"
"GRAD7=4.0m"

"TAUA2=d2-GRAD2-d16-d13"
"TAUA4=d4-GRAD4-d16-d13"
"TAUA5=d2-GRAD5-d16-d13"

# 113 "/pisa/exp/stan/nmr/lists/pp/c13hsqcse.cui"

"d0=d13"


# 121 "/pisa/exp/stan/nmr/lists/pp/c13hsqcse.cui"

"TAUB=d16+GRAD3+H1_180+d13*5"




# 130 "/pisa/exp/stan/nmr/lists/pp/c13hsqcse.cui"





# 138 "/pisa/exp/stan/nmr/lists/pp/c13hsqcse.cui"






  "d31=2*(TAUA2+TAUA4+TAUA5+GRAD2+GRAD4+GRAD5+GRAD6)+GRAD1+GRAD3+GRAD7+TAUB"





# 1 "/pisa/exp/stan/nmr/lists/pp//Avance.incl"
;Avance.incl
;
;version  99/08/02





























# 150 "/pisa/exp/stan/nmr/lists/pp/c13hsqcse.cui"

# 1 "/pisa/exp/stan/nmr/lists/pp//Grad.incl"
;Grad.incl  -  include file for Gradient Spectroscopy
;avance-version
;version 99/02/19
















define list<gradient> EA=<EA>
# 151 "/pisa/exp/stan/nmr/lists/pp/c13hsqcse.cui"

1 ze
  d12
  d14 setnmr8|8
2 d13 do:f3
  d14 setnmr8^4
  d14
  d11 setnmr2^0
  3m
3 d14
  d14
  d14
  d14
  d14
4 d13


# 1 "/pisa/exp/stan/nmr/lists/pp//faexptcorr.incl"
; This is here to trick "expt" to calculate the experiment time
; correctly.
  if "1 == 1" goto nod31
  d31
nod31, d13
# 168 "/pisa/exp/stan/nmr/lists/pp/c13hsqcse.cui"

  d1 pl1:f1 pl3:f3
  d13 setnmr2|0
  d13 setnmr0|34
  d13 setnmr8|4
  (C13_90 ph0):f3
  d13
  GRAD1:gp1			;400u, 15G/cm, sine.50
  d16
# 179 "/pisa/exp/stan/nmr/lists/pp/c13hsqcse.cui"

  (H1_90 ph0):f1
  d13
  GRAD2:gp2			;400u, 16G/cm, sine.50
  d16
  TAUA2
  (CEN_HC1 H1_180 ph0):f1 (C13_180 ph0):f3
  d13
  TAUA2
  GRAD2:gp2			;400u, 16G/cm, sine.50
  d16
# 193 "/pisa/exp/stan/nmr/lists/pp/c13hsqcse.cui"

  (H1_90 ph1):f1
  d13
  GRAD7:gp7			;1m, -15G/cm, sine.100
  d16
  d13
; Begin Carbon evolution
  (C13_90 ph11):f3
  d13
  d0 
  (H1_180 ph0):f1
  d0
  d13
  d13
  GRAD3:gp3*EA			;720u, +/-40G/cm, sine.100
  ;GRAD3:gp3			;720u, +/-40G/cm, sine.100
  d16
  (C13_180 ph0):f3
  TAUB
; End Carbon evolution
  (C13_90 ph12):f3
  d6
  (H1_90 ph0):f1
  d13
  GRAD4:gp4			;250u, 16G/cm, sine.32
  d16
  TAUA4
  (C13_180 ph0):f3
  (H1_180 ph0):f1 
  d13
  TAUA4
  GRAD4:gp4			;250u, 16G/cm, sine.32
  d16
  d7
  (C13_90 ph1):f3
  (H1_90 ph1):f1 
  d13
  GRAD5:gp5			;250u, 10G/cm, sine.32
  d16
  TAUA5
  (CEN_HC1 H1_180 ph0):f1 (C13_180 ph0):f3
  d13
  TAUA5
  GRAD5:gp5			;250u, 10G/cm
  d16
  (H1_90 ph0):f1
  d13
  GRAD6:gp6*-1			;91u, 40G/cm, sine.10
  d13
  d16 pl13:f3
  (H1_180 ph0):f1
  d13
  GRAD6:gp6			;91u, 40G/cm, sine.10
  d13
  d16 setnmr0^34
  go=2 ph31 cpds3:f3

# 253 "/pisa/exp/stan/nmr/lists/pp/c13hsqcse.cui"

  d11 do:f3 wr #0 if #0 zd setnmr8^4
  d13 setnmr2^0
  3m igrad EA
  d14 ip12
  d14 ip12
  lo to 3 times 2
  d14 id0
  d14 ip11
  d14 ip11
  d14 ip31
  d14 ip31
  lo to 4 times l4

  d14 setnmr8^8

exit
  
ph0=0
ph1=1
ph2=2
ph3=3
ph11=0 2
ph12=0
ph21=1
ph31=0 2
