
New TopShim run:

version = topshim 2.2.0
date = 2022-04-08
time = 08:28:10.410
command = topshim z6off 1d optsolvent coil=1H tunebz tuneaz shigemi

FINE SHIMMING

Parameters:

probe = Z168568_0011
solvent = D2O
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 4.70 ppm

Results:


1D Shimming:
Iteration 1: FWHM Before= 2.5 Hz, Target= 0.5 Hz, After= 0.5 Hz
Iteration 2: FWHM Before= 0.5 Hz, Target= 0.5 Hz, After= 0.5 Hz
Iteration 3: FWHM Before= 0.5 Hz, Target= 0.5 Hz, After= 0.5 Hz
Iteration 4: FWHM Before= 0.5 Hz, Target= 0.5 Hz, After= 0.5 Hz
Iteration 5: FWHM Before= 0.5 Hz, Target= 0.5 Hz, After= 0.5 Hz
Iteration 6: FWHM Before= 0.5 Hz, Target= 0.5 Hz, After= 0.5 Hz
Shim succeeded

Lineshape quality factor (1D shimming, non-spinning) = 0.599


Sample position (Shigemi) = -0.93 - 1.04 cm.


Performing tune after shimming
tune lock level increase = 1.0

shim changes: 
Z	-111
Z2	+45
Z3	-66
Z4	+1194
Z5	+328

duration = 1 min 18 sec
completed successfully
finished Fri Apr  8 08:29:26 2022


========================================================================

New TopShim run:

version = topshim 2.2.0
date = 2022-04-08
time = 08:30:14.641
command = topshim z6off 1d optsolvent coil=1H tuneboff tuneaoff shigemi

FINE SHIMMING

Parameters:

probe = Z168568_0011
solvent = D2O
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 4.70 ppm

Results:


1D Shimming:
Iteration 1: FWHM Before= 1.5 Hz, Target= 0.5 Hz, After= 0.5 Hz
Iteration 2: FWHM Before= 0.5 Hz, Target= 0.5 Hz, After= 0.5 Hz
Iteration 3: FWHM Before= 0.5 Hz, Target= 0.5 Hz, After= 0.5 Hz
Iteration 4: FWHM Before= 0.5 Hz, Target= 0.5 Hz, After= 0.5 Hz
Iteration 5: FWHM Before= 0.5 Hz, Target= 0.5 Hz, After= 0.6 Hz
Iteration 6: FWHM Before= 0.6 Hz, Target= 0.5 Hz, After= 0.5 Hz
Shim succeeded

Lineshape quality factor (1D shimming, non-spinning) = 0.672


Sample position (Shigemi) = -0.93 - 1.04 cm.

shim changes: 
Z	-19
Z2	-5
Z3	-5
Z4	+88
Z5	+24

duration = 59 sec
completed successfully
finished Fri Apr  8 08:31:12 2022


========================================================================

New TopShim run:

version = topshim 2.2.0
date = 2022-04-08
time = 08:31:41.494
command = topshim z6off 1d optsolvent coil=1H tuneboff tuneaoff shigemi

FINE SHIMMING

Parameters:

probe = Z168568_0011
solvent = D2O
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 4.70 ppm

Results:


1D Shimming:
Iteration 1: FWHM Before= 0.5 Hz, Target= 0.5 Hz, After= 0.5 Hz
Iteration 2: FWHM Before= 0.5 Hz, Target= 0.5 Hz
Shim succeeded

Lineshape quality factor (1D shimming, non-spinning) = 0.612


Sample position (Shigemi) = -0.93 - 1.04 cm.

shim changes: 
Z	+2
Z2	+5
Z3	+6
Z4	-83
Z5	-23

duration = 31 sec
completed successfully
finished Fri Apr  8 08:32:10 2022


========================================================================

New TopShim run:

version = topshim 2.2.0
date = 2022-04-08
time = 08:32:30.078
command = topshim z6off 1d optsolvent coil=1H tuneboff tuneaoff shigemi

FINE SHIMMING

Parameters:

probe = Z168568_0011
solvent = D2O
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 4.70 ppm

Results:


1D Shimming:
Iteration 1: FWHM Before= 0.5 Hz, Target= 0.5 Hz, After= 0.6 Hz
Iteration 2: FWHM Before= 0.6 Hz, Target= 0.5 Hz, After= 0.5 Hz
Iteration 3: FWHM Before= 0.5 Hz, Target= 0.5 Hz, After= 0.5 Hz
Iteration 4: FWHM Before= 0.5 Hz, Target= 0.5 Hz
Shim succeeded

Lineshape quality factor (1D shimming, non-spinning) = 0.644


Sample position (Shigemi) = -0.93 - 1.04 cm.

shim changes: 
Z	+2
Z2	+9
Z3	+14
Z4	-123
Z5	-73

duration = 42 sec
completed successfully
finished Fri Apr  8 08:33:10 2022


========================================================================

New TopShim run:

version = topshim 2.2.0
date = 2022-04-08
time = 08:33:15.620
command = topshim z6off 1d optsolvent coil=1H tuneboff tuneaoff shigemi

FINE SHIMMING

Parameters:

probe = Z168568_0011
solvent = D2O
shim nucleus = 2H
nucleus optimised for = 1H
o1p (from lock) = 4.70 ppm

Results:


1D Shimming:
Iteration 1: FWHM Before= 0.5 Hz, Target= 0.5 Hz, After= 0.6 Hz
Iteration 2: FWHM Before= 0.6 Hz, Target= 0.5 Hz, After= 0.5 Hz
Iteration 3: FWHM Before= 0.5 Hz, Target= 0.5 Hz, After= 0.5 Hz
Iteration 4: FWHM Before= 0.5 Hz, Target= 0.5 Hz, After= 0.5 Hz
Shim succeeded

Lineshape quality factor (1D shimming, non-spinning) = 0.677


Sample position (Shigemi) = -0.93 - 1.04 cm.

shim changes: 
Z3	+2
Z4	+10
Z5	+6

duration = 47 sec
completed successfully
finished Fri Apr  8 08:34:01 2022


========================================================================
